TẬP ĐOÀN CÔNG NGHỆ NTECH

CÔNG TY TNHH ĐẦU TƯ & PHÁT TRIỂN CÔNG NGHỆ MỚI

TOP Doanh Nghiệp Uy Tín Việt Nam Thương hiệu Mạnh ASEAN STRONG BRANDS NTECH GROUP - SINCE 2002

TỦ SẠC ẮC QUY VIỄN THÔNG PMI 24/48VDC 10A - 200A

Tình trạng: Còn hàng
  • Hãng: PMI
  • Mô tả sản phẩm: Tủ sạc ắc quy là thiết bị không thể thiếu cho các nhà máy, xí nghiệp, viễn thông… là thiết bị cung cấp nguồn điện áp một chiều cho các thiết bị điều khiển trong các trạm đóng cắt, điều khiển trong điện lực. Tủ sạc kèm với bộ lưu điện UPS cho nhà máy, xí nghiệp ngày càng được sử dụng rộng rãi phục vụ cho dây truyền máy móc tự động hóa, đảm bảo an toàn và kịp tiến độ sản xuất, giảm được nhân công vận hành hệ thống, giảm sai sót trong quá trình hoạt động.
Mua hàng chính hãng tại Showroom
  • Ô 15 TT5.1 KĐT Lexington Estates, P.Thịnh Liệt, Q. Hoàng Mai, Hà Nội
  • 435 Lê Văn Thọ, P.9, Q.Gò Vấp, TP.HCM
  • 457 Tôn Đức Thắng, Q.Liên Chiểu, TP. Đà Nẵng
  • Với lợi thế là đại diện phân phối độc quyền tủ sạc ắc quy của hãng, đến với chúng tôi quý khách hàng sẽ được hưởng các sản phẩm và dịch vụ tốt nhất.
  • Được thành lập từ năm 2002, sau 15 năm hoạt động Công Ty Đầu Tư Và Phát Triển Công Nghệ Mới (tên viết tắt là NTECH) hiện là một trong những nhà cung cấp thiết bị điện, viễn thông hàng đầu tại Việt Nam. Tủ sạc ắc quy viễn thông (Battery Charge) là 1 trong những lĩnh vực thế mạnh của chúng tôi.

TẬP ĐOÀN CÔNG NGHỆ MỚI NTECH với 20 năm kinh nghiệm là nhà phân phối chính hãng các sản phẩm Bộ lưu điện UPS Makelsan, Borri, Tescom, Lever tại Việt Nam.

NHỮNG TIÊU CHÍ CAM KẾT VỚI KHÁCH HÀNG :

✔️ Bộ lưu điện UPS có giá thành tiết kiệm tới 30% so với thị trường vì Ntech là nhà phân phối chính hãng tại VN

✔️ Khảo sát, tư vấn, thiết kế MIỄN PHÍ.

✔️ Lắp đặt, hướng dẫn vận hành bởi đội ngũ kỹ sư có trình độ chuyên môn cao. Hỗ trợ nhiệt tình về các sự cố kỹ thuật bởi các chuyên gia nước ngoài.

✔️ Giao hàng tận nơi trên toàn quốc. 

✔️ Bảo hành tận nơi, thời gian bảo hành dài. Lỗi 1 Đổi 1 trong vòng 1 tháng. Bảo trì định kỳ theo tiêu chuẩn nhà sản xuất.

✔️ Đặc biệt hỗ trợ dự án: về giá, giao hàng tận công trình.

✔️ Sản phẩm cung cấp có nguồn rõ ràng: CO, CQ, hóa đơn đỏ,... Cung cấp đầy đủ các loại giấy tờ cần thiết cho các dự án, công trình.

Battery Charger / DC Rectifier

GENERAL
Model Monophase Input Threephase Input
Topology 6 Pulse Thyristor controlled AC/DC Rectifier with input isolation transformer
Optional 12 Pulse Thyristor controlled AC/DC Rectifier with input isolation transformer
INPUT
Nominal Voltage 110 VAC / 115VAC /208 VAC / 220 VAC / 230 VAC / 240 VAC ±15% 190 VAC / 200 VAC /380 VAC / 400 VAC / 415 / 480 VAC ±15%
Nominal Frequency 50 / 60 Hz ±5%
Power Factor >0.8 Inductive (>0.9 with 12 Pulse Rectifier)
Transformer Galvanically isolated
ITHD <30% (standard); <10% (with 12 Pulse Rectifier)
Input Protection Thermic-Magnetic Over Current Protection, Over Voltage Protection, Phase Sequence Free Operation (3 Phase), Soft Start
OUTPUT
Floating Output Voltage 12/24 VDC±1% / 48 VDC±1% / 110 VDC±1% / 220 VDC ±1%
Output Voltage Adjustment 12/24VDC output: 10VDC to 30VDC, 48VDC output: 48VDC to 60VDC, 110VDC output: 110VDC to 160VDC, 220VDC output: 220VDC to 300VDC
Output Current Adjustment 0-100% of Nominal Output Current
Battery Charge Current Adjustment 0-100% of Nominal Output Current
Boost Charge Voltage 100% to 120% of Floating Output Voltage
Boost voltage (V/C) 2,4 lead acid battery 1,60 NiCd Battery
Float voltage (V/C) 2,23 lead acid battery 1,40 NiCd battery
Nominal Output Current Available upto 1200 Amp (12 Pulse over 400 Amp)
Maximum Output Current 100% of nominal output current
Output Ripple 1% RMS AC of Output Voltage
Dynamic Response (w/out battery group) ±5% of Output Voltage (25% load change at 50% load)
Dynamic Response (with battery group) ±2% of Output Voltage (100% load change)
Battery Charging Principle Constant Current/ Constant Voltage
Output Protection Short Circuit Protection, Over Voltage Protection, Reverse Voltage Protection
Short Circuit, Overvoltage protection, MCB and Phase Sequence Protection
Battery Protection L-C filters, Overcurrent Electronic protection,Over Voltage Protection and Thermic Fuse
GENERAL
Boost Timer 0 – 99.9 hours adjustable
Cooling Forced fans with smart fan controlling system
Isolation Voltage 2500VAC input/chassis and output/chassis
Efficiency at full load >90% >92%
MTBF 100,000 Hrs. (w/out battery group)
Operating Temperature -10 / + 40 ºC
Protection Level IP20 (Standard); IP54 (Optional)
Enclosure Material Mild Steel, Zinc-phosphate coated; 100 μm electrostatic paint; 1.5 mm thickness
Cable Entry Front Botttom
Access to Batteries Batteries and rectifier in the same cabinet with front access (optional)
Relative Humidity 5% to 90% non condensing
Circuit Breakers Thermic – magnetic circuit breakers for Input, Battery and Load ( up to 100A)
Silicon Dropper Available on request (For load output)
Reset Button Used for re-operation in case of failure of the system. (Without disconnecting the load from battery group)
Boost inhibit Interlock application inhibits one of the rectifiers for boost operation in parallel redundant mode
DISPLAY PANEL
Front Panel Measured Values LCD Display for Load Output Voltage / Current , Battery Output Voltage / Current and Line Voltage / Line Current / Frequency
Front Panel Indicators Float mode, Boost mode, Current mode, Boost inhibit, Battery ending, Low battery, Battery test failure, Line failure, Fan failure, Over voltage, Under voltage, Over temperature, Rectifier failure, SCR fuse failure (LED indication), Line MCB (LED indication), Load MCB (LED indication), Battery MCB (LED indication)
Front Panel Set Menu Boost charge voltage, Float charge voltage, Low battery voltage , Battery test , Charger output current, Battery charge current, Battery automatic boost current and float current, Auto & Manual boost selection, Manual boost time, LED test and On - OFF.
Event History Last 250 events recorded and displayed on front panel and on PC via RS 485
Time and Date Adjustable
ALARM CONTACTS
Charger Failure Open or closed free contacts
Low Battery Open or closed free contacts
Rectifier over voltage Open or closed free contacts
Over temperature Open or closed free contacts
Line Failure Open or closed free contacts
Load MCB Open or closed free contacts
Battery MCB Open or closed free contacts
Line MCB Open or closed free contacts
ENVIRONMENT
Operating Temperature -10 / +40 °C
Relative Humidity 5 - 90 %
Operating Altitude Max. 2000 Mt.
Noise Level Max. 60 db
Electrical Standards EN 50091-1 (Security) / EN 50091-2 (EMC)
COMMUNICATION & PARALLELING
Optional Communication RS 232 / RS 485 - Timer Setting, Boost Voltage Setting, Float Voltage Setting ,Output current setting, battery current setting , automatic boost setting and Reset buttons.
Paralleling N+1 Parallel Redundant (No need for extra kit for paralleling)

 

TẬP ĐOÀN NTECH

CÔNG TY TNHH ĐẦU TƯ & PHÁT TRIỂN CÔNG NGHỆ MỚI

ĐKKD số 0101273860 do sở kế hoạch đầu tư TP Hà Nội cấp ngày 05/06/2002

Thông tin liên hệ

Trụ Sở chính Miền Bắc:

  • Ô 15 TT5.1 KĐT Lexington Estate, Hoàng Mai, Hà Nội
  • 0243 56 56 036
  • 098 639 9898 - (Hotline)
  • hotline@ntech.com.vn

Trụ Sở chính Miền Nam:

  • Lầu 20, tòa nhà A&B, 76 Lê Lai, P. Bến Thành, Quận 1, TP. HCM
  • 028 6686 35 81
  • 0976 58 38 98 - (Hotline)
  • banhang@ntech.com.vn

Trụ Sở chính Đà Nẵng:

  • Số 457/44/20 Tôn Đức Thắng, Quận Liên Chiểu, Tp.Đà Nẵng
  • 0976 58 38 98 - (Hotline)
  • banhang@ntech.com.vn

Thông tin liên hệ

Copyright © 2002 - 2017 Công ty TNHH Đầu tư và Phát triển Công Nghệ Mới
ZALO
HN
ZALO
HCM
X

design by: fditech.vn